Table of Contents
Advertisement
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, first unplug the power adapter.
See EXPLODED DRAWING A on page 34. Using
a standard screwdriver, gently release the tabs on the
Top Shield (44), and remove the Top Shield.
Next, identify the Access Cover (40). Remove the
M4 x 16mm Screw (77) from the Access Cover, and
then remove the Access Cover.
Next, locate the Reed Switch (46). Turn the Left Crank
Arm (24) until a Pulley Magnet (30) is aligned with
the Reed Switch. Then, slightly loosen the indicated
24
M4 x 16mm Screw (77), slide the Reed Switch slightly
closer to or away from the Pulley Magnet, and then
retighten the Screw.
30
46
Plug in the power adapter, and turn the Left Crank
Arm (24) for a moment. Repeat these actions until the
console displays correct feedback.
77
When the reed switch is correctly adjusted, unplug
the power adapter and reattach the parts that you
removed. Then, plug in the power adapter.
28
Advertisement
Table of Contents
