Smart Technologies SMART Board SBID-7275-V2 Installation And Maintenance Manual page 67

Appendix A Adjusting settings
Option
Green
Blue
HDMI Output
Default resolution
HDMI Input
Advanced HDMI Settings
Go to the Input Lobby
when there is no signal
Power Management
Turn on when people are
nearby
Audio
Audio In
These options are available for SMART Board 6000S (V3) models only.
Volume
smarttech.com/kb/171164
Values Function
0–448 Sets the overall green of the image.
0–448 Sets the overall blue of the image.
Auto Sets the HDMI out resolution.
4K60
1080p60
720p60
640x480p60
HDMI 1.0 Sets the HDMI version, HDP pulse
width, and MHL setup delay for each
HDMI 2.0
HDMI input.
HDMI 3.0
OPS
VGA
On When enabled, show the input
previews when there is no signal.
Off
On Sets the display to turn on if the
presence detection sensors detects
Off
users in the room.
Range slider Sets the microphone's volume.
Notes User or system
setting
[N/A] System
[N/A] System
This option is System
available for
SMART Board
7000-V2 and
7000-V2 Pro
only.
You can also System
enable or disable
strictly
conformant
HDMI Input
DDC SDA timing
and forbid or
allow HDCP 2.2
with older
receivers.
This option is
available for
SMART Board
7000-V2 and
7000-V2 Pro
only.
This option is System
available for
SMART Board
7000-V2 and
7000-V2 Pro
only.
This option is off System
by default.
This option is
available for
SMART Board
7000 and 7000
Pro only.
[N/A] System
67