Samsung Xpress M2070 Series Service Manual page 96

4. Alignment and Troubleshooting
► Error Code
M2–1317
► Error message
Paper Jam inside machine
► Symptom
A paper jam was detected in the fuser unit area.
► Troubleshooting method
• If the machine supports fax.
1) Open the top cover. Remove the jammed paper.
2) Turn the machine off.
3) Turn the machine on while pushing the cancel button. Wait for rebooting the machine.
• If the machine not supports fax.
1) Open the top cover. Remove the jammed paper.
2) Entering Tech Mode. (Refer to Tech Mode section.)
3) Select Data Setup.
4) Wrap Jam Clear
Select Yes
4-30
by Ok button, and the machine is rebooted after Error Clear.
Copyright© 1995-2013 SAMSUNG. All rights reserved.