Panasonic SW50 Operating Instructions Manual page 12

3
3
Holdthewater
supplyplateupand
lettheexcesswater
runsoff.
• Make sure the water
covers the mesh holes
completely. If there is
too much water and
large water drops form
on the water supply
plate, the water drops
may drip when the
appliance is attached
to the face. (See the
diagram on the right)
• Do not use face lotion, etc.
• If the water supply plate is not wet, you will not feel steam.
• Do not wet the main unit itself with tap water.
12
Diagram showing the water
supply plate from the side.
Mesh holes
Water
4
4
Attachthewater
supplyplatetothe
mainunit.
1. Hold so that the
protruding part of the
knob is facing upward.
2. Set the water supply
plate under the water
supply plate
attachment clasps (2
pc) on the main unit.
3. Press down firmly on
the knob and attach
securely.
• The water supply plate has front and rear sides. It cannot
be properly attached if it is attached to the wrong side.
• If there is a lot of water on the water supply plate, water
drops may splash when attached.
1
Protruding
part
2
Clasp
3
Snap