Table of Contents
Advertisement
• Ability to deliver Bluetooth audio to third-party cameras that are
capable of receiving audio via the Hands-Free Profile. HFP 1.6 "Wide
Band Speech" format is supported by the GMA 345 3-COM.
• AVCRP Bluetooth profile for entertainment audio media controls (Play/
Pause, Skip Forward, and Skip Previous).
During power up the GMA automatically reconnects to the last
connected device. This is annunciated by the Bluetooth annunciator
illuminating.
If the same Bluetooth device is used to play music and make a phone
call, the phone has priority and the music audio is suspended. Music
audio resumes when the phone call disconnects and the music connection
is re-established by the source device.
P
airing a
The Bluetooth annunciation is illuminated only when a Bluetooth
NOTE:
device is connected.
Pairing mode allows a new device to discover and create a connection
to the GMA 345 3-COM. Additionally, pairing mode is used to forcefully
disconnect a device currently connected to the GMA 345 3-COM.
Press and hold the TEL (PAIR) Key for one second to enter pairing
mode. The Bluetooth annunciator flashes to indicate the GMA 345
3-COM is in pairing mode and "Pairing Enabled" audio is played. Once
the Bluetooth annunciator flashes, the GMA is discoverable for two
minutes, or until a device is paired or connected. While discoverable,
a Bluetooth enabled device (e.g., cellphone or tablet) can find and pair
with the GMA. Refer to the device' s instruction manual for information
on how to pair and connect to a new Bluetooth device. Once paired
and connected, the Bluetooth annunciator on the GMA stops flashing
and remains lit as long as the Bluetooth connection is active. The GMA
remembers the last 10 paired devices. When the paired devices list is
full and a new device is paired, the least recently connected device is
removed from the paired device list.
190-01878-05 Rev. A
B
d
lueTooTh
evice
Garmin GMA 345 3-COM Pilot's Guide
GMA 345 3-COM Audio Panel
27
Advertisement
Table of Contents
