Acura NSX 2020 Owner's Manual page 88

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
• Appears when you turn the power system on with the
transmission not in
• Appears when you try to change the gear position after
the position has automatically been changed to
with the driver's door open and the driver's seat belt
unfastened.
• Appears when you set the power mode to ON without
fastening the driver's seat belt.
• Appears when you change the gear position after
has been automatically selected with the driver's door
open, the driver's seat belt unfastened, then the brake
pedal is released.
• Appears when you try to change the gear position
without depressing the brake pedal.
• Appears when you try to change the gear position
without releasing your foot off the accelerator pedal.
86
Condition
( P .
P (
Explanation
( P button.
• Press the
P button if you leave the vehicle. (
• Press the
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 328
( P
• Depress the brake pedal, then select a shift button.
• Release your foot from the accelerator pedal, depress
the brake pedal, then select a gear.