Acura NSX 2020 Owner's Manual page 349

■
VSA® On and Off
VSA® OFF Indicator
■
When the Integrated Dynamics System mode is in QUIET mode, SPORT
mode, or SPORT+ mode
uuWhen DrivinguVehicle Stability Assist
This button is on the driver side control panel.
This button is used to change VSA® modes.
See below for more information.
VSA® is turned on every time you turn the
power system on, even if you press the button
the last time you drove the vehicle.
To enter Stuck Vehicle Assist mode, press
the VSA® OFF button until a single beep is
heard and the VSA® OFF indicator illuminates.
u
This message appears on the driver
information interface for a few seconds.
If the Integrated Dynamics System mode is
changed, VSA® will remain in Stuck Vehicle
Assist mode.
To exit Stuck Vehicle Assist mode, press the
VSA® OFF button until a single beep is heard
and the VSA® OFF indicator extinguishes.
TM (VSA®), aka Electronic Stability Control (ESC), System
1Vehicle Stability Assist
(ESC), System
In Stuck Vehicle Assist mode, your vehicle will have
normal braking and cornering ability, but VSA®
traction and stability enhancement becomes less
effective.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with Stuck Vehicle Assist mode.
In Stuck Vehicle Assist mode, the traction control
function becomes less effective. This allows for the
wheels to spin more freely at low speed. You should
only attempt to free your vehicle with the
pressed if you are not able to free it without.
Immediately after freeing your vehicle, be sure to
press the button again. We do not recommend
driving your vehicle with Stuck Vehicle Assist mode.
You may hear a motor sound coming from the front
of the vehicle while system checks are being
performed immediately after turning the power
system on or while driving. This is normal.
Continued
TM (VSA®), aka Electronic Stability Control
button
347