Acura NSX 2020 Owner's Manual page 437

■
Injecting Sealant and Air
Tire Valve Stem
Valve Cap
Tire Valve Stem
Sealant/Air Hose
Bottle Adapter
Bottle
Cap
Air Compressor Hose
1. Remove the valve cap from the tire valve
stem.
2. Shake the sealant bottle.
3. Attach the sealant/air hose onto the tire
valve stem. Screw the sealant/air hose
until it is tightly connected to the valve
stem.
u Make sure the bottle remains upright to
ensure all the sealant flows into the tire.
4. Remove the bottle cap from the bottle
adapter.
5. Attach the air compressor hose onto the
bottle adapter. Screw the air compressor
hose until it is tightly connected to the
bottle adapter.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1Injecting Sealant and Air
WARNING
3
Tire sealant contains substances that are
harmful and can be fatal if swallowed.
If accidentally swallowed, do not induce
vomiting. Drink plenty of water and get
medical attention immediately.
For skin or eye contact, flush with cool
water and get medical attention if
necessary.
Keep the sealant bottle out of the reach of children.
Do not shake the bottle after the bottle cap removed.
If you shake the bottle after the cap is removed, it
may spill sealant.
In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.
The sealant is latex based and can permanently stain
clothing and other materials. Be careful during
handling and wipe up any spills immediately.
Continued 435