Acura NSX 2020 Owner's Manual page 350

uuWhen DrivinguVehicle Stability Assist
■
When the Integrated Dynamics System mode is in TRACK mode
When you set the Integrated Dynamics System mode to TRACK, the VSA® system
switches to Track mode and the VSA® OFF indicator comes on. The VSA® features
do not stop, but the thresholds for them to activate become higher. Additional care
should be used while driving in TRACK mode, and TRACK mode should only be
used while driving on closed circuits.
348
TM (VSA®), aka Electronic Stability Control (ESC), System
To enter Stuck Vehicle Assist mode, press
the VSA® OFF button until a single beep is
heard.
u
This message appears on the driver
information interface for a few seconds.
If the Integrated Dynamics System mode is
changed, VSA® will remain in Stuck Vehicle
Assist mode.
To exit Stuck Vehicle Assist mode, press the
VSA® OFF button until a single beep is heard.
u This message appears on the driver
information interface.
1When the Integrated Dynamics System mode is in TRACK mode
In OFF mode, your vehicle will have normal braking
and cornering ability, but it will not have VSA®
traction and stability enhancement.
When the VSA® system is off, the traction control
system and agile handling assist system are also off.
We do not recommend driving your vehicle with the
VSA®, traction control system, and agile handling
assist system switched off.
If the low tire pressure/TPMS indicator comes on or
blinks, the VSA® system comes on automatically. In
this case, you can select Stuck Vehicle Assist mode
to free a stuck vehicle, but you cannot select the
VSA® OFF mode by pressing the button.