Treadmill Operation - Everlast EV651 Owner's Manual

TREADMILL OPERATION

Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply
silicone spray or other substances to the walking belt or walking board. Such substances
will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD.
GROUNDING INSTRUCTIONS.
This product must be grounded. Plug adapters should NOT be used with this product.
WARNING:
Improper connection of the equipment-grounding
conductor can result in a risk of an electric shock.
Check with a qualified electrician if you are in
doubt as to whether the product is properly
grounded. Do not modify the plug provided with
the product if it will not fit the outlet; have a proper
outlet installed by a qualified electrician. The use
of an extension cord with this product is not
recommended. If an extension cord is needed, use
a short (less than 10 feet) heavy gauge (14 gauge
or better) extension cord with a three-prong
(grounded) plug and receptacle. IMPORTANT: If
the power cord is damaged, it must be replaced
with a manufacturer-recommended power cord.
1 Plug the indicated end of the power cord into
the socket of the treadmill.
2 Plug the power cord into an appropriate outlet
that is properly installed and grounded.
Important: The treadmill is not compatible with
GFCI-equipped outlets .
Note: Your power cord and outlet may appear different
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
12
Dyaco Canada Inc. 2021