Operation Of Your Treadmill - Everlast 1650901 Owner's Manual

Operation of Your Treadmill

Console
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the Time
and Distance windows will display Odometer readings for a short time. The Time window will
show how many hours the treadmill has been in use and the Distance window will show how
many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. Then a
message will scroll across the message window showing the current software version. The
treadmill will then enter idle mode, which is the starting point for operation.
Quick-Start Operation:
STEP 1: Press and release the Start key to wake display up (if not already on).
Note: Installing the tether key will also wake up the console.
STEP 2: Press and release the Start key to begin belt movement, at .5 mph, then
adjust to the desired speed using the Fast / Slow keys (console or hand rail). You may also use
the rapid speed keys 2 through 12 to adjust the speed.
15
2012