Treadmill Operation - Everlast 1654701 Owner's Manual

Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply
silicone spray or other substances to the walking belt or walking board. Such substances
will deteriorate the walking belt and cause excessive wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter should be used with this product.
WARNING:
Improper connection of the equipment grounding
conductor can result in a
risk of an electric shock. Check with a qualified
electrician if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product, if it will not fit the
outlet; have a proper outlet installed by a qualified
electrician. The use of an extension cord with this
product is not recommended. If an extension cord
is needed, use a short (less than 10 feet) heavy
gauge (14 gauge or better) extension cord with a
three prong (grounded) plug and receptacle.
IMPORTANT: If the power cord is damaged, it
must be replaced with a manufacturer
recommended power cord.
1 Plug the indicated end of the power cord
into the socket of the treadmill. See drawing below.
2 Plug the power cord into an appropriate
outlet that is properly installed and gounded. See
drawing below. Important: The treadmill is not
compatible with GFCI-equipped outlets .
Note: Your power cord and outlet may appear different
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca

Treadmill Operation

11
Dyaco Canada Inc. 2014