Advertisement
Installation
WARNING: Failure to install the
cassette as instructed below
may result in damage to the
equipment and or may expose
the user to the risk of fire, ser-
ious injury, illness or death.
WARNING: Do not attempt to
wire your own new outlets or
circuits. To reduce the risk of
fire, electric shock or injury to
persons, always use a licensed
electrician.
WARNING: Ensure that the
On/Off switch is set to the OFF
position (refer to Operation
section) and that the circuit on
which the unit is to be installed
has the power cut off at the
service panel until installation is
complete.
!
NOTE: Please read all instruc-
tions before installing.
Cassette Plumbing
The units come equipped with refill
containers for manual filling of the
reservoir. The unit can be hard
plumbed with the Dimplex plumbing
accessory kit - CDFIPLUMB-KIT,
available from your local Dimplex
dealer, or with standard 1/4 in. (6.4
mm) tubing, using the information
outlined below.
Figure 1
CDFI500P
Ball Valve
To water
Filter
source
CDFI1000P
To water
Ball Valve
source
NOTE: The plumbing accessory
!
kit is designed for use with copper
piping.
CAUTION: Ensure that all
plumbing connections meet local
plumbing code requirements.
CAUTION: Ensure that the
location of the plumbing connection
allows for easy access to allow for
shutoff during scheduled mainten-
ance.
Locate a cold water line in the
1.
vicinity of the desired location
of the cassette.
NOTE: Normal tap water can be
!
used in the Opti-myst
the tap water is not considered to
be hard water. In the event your tap
water is hard, softened or filtered
water is recommended.
Turn OFF the main water sup-
2.
Filter
as long as
®
7
Advertisement
