Entering A Number - Sanyo SCP-7000 User Manual

have floor."Continue with the Sprint PCS Ready Link call
as described on the previous page.)
4.
When the call is finished, press
Tip:
The phone beeps if you press
the floor.
You can also make a Group Call after checking the group
member. Select
< Call Group > and press and hold
To redial your last Sprint PCS Ready Link call, highlight Redial
and press and hold
Making a Sprint PCS Ready Link Call by

Entering a Number

To place a Sprint PCS Ready Link call by entering a number:
1.
From standby mode, enter the Sprint PCS Ready Link
number you want to dial.
2.
Press
Continue holding
3.
Continue with the Sprint PCS Ready Link call, pressing
and holding
others to reply.
146 Section 2I: Using Sprint PCS Ready Link
To make a Sprint PCS Ready Link call to a group
member, select a group, highlight a group member,
and press and hold
If one of the group members takes the floor, you will
see the member's name and Sprint PCS Ready Link
number on the display.
to place the Sprint PCS Ready Link call.
The contact's name is displayed if there is a matched
number in your Sprint PCS Ready Link List.
.
when another party has
to display group members, highlight
from the Sprint PCS Ready Link List.
to take the floor and speak.
to speak and releasing it to allow
.
during step 3 above.