Saving A Phone Number From Call History - Sanyo SCP-7000 User Manual

Saving a Phone Number From Call History

Your phone can store up to 500 phone numbers in up to 300
Contacts entries. (An entry may contain up to seven numbers.)
Each entry's name can contain 16 characters.
To save a phone number from Call History:
1.
Select
2.
Use your navigation key to select a Call History entry and
press Options (right softkey).
3.
Select Save Phone #.
4.
Select an appropriate label and press
5.
Enter a name and press
entry in the Contacts list, you are prompted to select the
following entry mode:
New Name to enter a name directly.
From Ph. Book to select a name from the Contacts
list.
6.
Press Save (left softkey).
After you have saved the number, the new Contacts entry is
displayed. (See "Contacts Entry Options"on page 108.)
Note:
You cannot save phone numbers already in your Contacts or
from calls identified as No ID or Private .
> Call History > Outgoing, Incoming, or Missed.
Section 2E: Managing Call History
.
. Once you have stored an
103