Net Guard; Sprint Pcs Vision Connection Status And Indicators - Sanyo SCP-4920 User Manual

Net Guard

When you first connect to the Web, the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections. You can disable the Net Guard in the future
by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
1.
Press
2. Select Settings and press
3. Select PCS Vision and press
4. Select Net Guard and press
5. Select On or Off and press
Note:
When enabled, the Net Guard appears only once per session. The Net
Guard does not appear if the phone is merely re-connecting due to a time-out.

Sprint PCS Vision Connection Status and Indicators

Your phone's display lets you know the current status of your
Sprint PCS Vision connection through indicators which appear at the
top of the screen. The following symbols are used:
Your Vision connection is active (data is being transferred); the
transmit/receive symbol will blink to indicate data transmission.
Incoming voice calls go directly to voicemail; outgoing voice
calls can be made, but the Vision connection will terminate.
Your Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly; voice calls can
be made and received.
Your phone is not currently able to access Sprint PCS Vision
service features.
If no indicator appears, your phone does not have a current Vision
connection. To launch a connection, see "Launching a Sprint PCS
Vision Connection" on page 161.
Section 3B: Sprint PCS Vision
to access the main menu.
On to activate the Net Guard.
Off to deactivate the Net Guard.
.
.
.
.
162