Controlling Roaming Charges Using Call Guard - Sanyo SCP-4920 User Manual

Controlling Roaming Charges Using Call Guard

Your phone has two ways of alerting you when you are roaming off
the network provided to you: the onscreen roaming icon and Call
Guard. Call Guard makes it easy to manage your roaming charges by
requiring an extra step before you can place or answer a roaming call.
(This additional step is not required when you make or receive calls
while on the network provided to you.)
To turn Call Guard on or off:
1.
Press
2. Select Settings and press
3. Select Roaming and press
4. Select Call Guard and press
5. Select On or Off and press
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts directory,
Call History, or Messaging.)
2.
Press
softkey] and highlight Call or Call:Speaker On) and press
3.
Press
– or –
Press any key to erase the pop-up message, press Options (right
softkey), highlight Roam Call, or Roam:Speaker On, and press
To answer incoming roaming calls with Call Guard on:
Press Options (right softkey), highlight Answer or
Answer:Speaker, and press
– or –
1.
Press
2.
Press
Reminder:
If the Call Guard feature is set to
make and receive roaming calls, even if you have selected the
(see page 68).
Section 2D: Controlling Your Roaming Experience
to access the main menu.
or Speaker (left softkey) (or press Options [right
to proceed while the pop-up message is displayed.
or Speaker (left softkey).
to proceed while the pop-up message is displayed.
.
.
.
.
.
, you need to take extra steps to
On
.
setting
Analog
.
69