Assigning Speed Dial Numbers - Sanyo SCP-4920 User Manual

Assigning Speed Dial Numbers

With this feature you can dial Contacts Directory entries with one
key press for locations 2-9. Save your memory locations 2-9 for speed
dialing your most commonly used phone numbers. Speed Dial
numbers must be stored in your Contacts to use this feature.
To assign Speed Dial:
1.
Press
2. Select Contacts and press
3. Select Speed Dial #s and press
4.
To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press
5.
Select an entry from the list and press
6.
Select the phone number you want to set as a speed dial and
press
– or –
1.
Press the navigation key right.
2.
Highlight your desired entry by scrolling through the Contacts
list and press
3.
Highlight the phone number you want to set as a speed dial and
press Options (right softkey).
4. Highlight Set Speed Dial and press
5.
Highlight an unassigned number and press
Tip:
When you highlight an assigned number and press
whether you want to overwrite the assigned number. Select
to cancel.
No
To cancel a stored speed dial number:
1.
Press
2. Select Contacts and press
3. Select Speed Dial #s and press
4.
Highlight the stored speed dial number you want to cancel and
press
5. Highlight Unassign and press
To use Speed Dial:
From standby mode, just press and hold the appropriate key.
Section 2G: Using the Contacts Directory
to access the main menu.
.
.
to access the main menu.
.
.
.
.
.
.
.
.
.
.
, you'll be asked
to overwrite or
Yes
86