Launching A Data Connection; Net Guard - Sanyo KATANA User Manual

Launching a Data Connection

To launch a data connection:
Select
page will be displayed.)
Note:
If Net Guard is enabled and displayed (see below), press OK (right softkey) to
continue and access the Web.
While connecting, the following will appear on the screen:
Connecting...Please wait.
If you had a previous data connection, the last page you visited will be
displayed when you launch your browser.When this occurs, you may not see
the "Connecting..." message when you launch the session.Though the
browser is open, you are not currently in an active data session – that is, no
data is being sent or received.As soon as you navigate to another page, the
active session will start and you will see the "Connecting..." message.

Net Guard

When you first connect to the Web, the Net Guard will appear to confirm that
you want to connect.This feature helps you avoid accidental connections.
You can disable the Net Guard in the future by selecting Always Auto-
Connect when the Net Guard is displayed.
To change your Net Guard settings:
Select
Note:
When enabled,the Net Guard appears only once per session.The Net Guard does not
appear if the phone is merely reconnecting due to a time-out.
170 Section 3B: Data Services
> Web. (Your data connection will start and the home
> Settings > Web > Net Guard and choose an option:
On to activate the Net Guard.
Off to deactivate the Net Guard.