Connectivity; Cloud Services; Accounts - Bosch DINION inteox 7100i IR User Manual

18 en | Configuration
Allow local recording
Specify whether the icon for saving video sequences locally should be displayed below the live
image. Video sequences can only be saved locally on your hard disk if this icon is visible.
Path for JPEG and video files
Enter the path for the storage location of individual images and video sequences saved from
the Live page.
Video file format
Select a file format for the live page display. The MP4 format does not include metadata.
Click Set to apply the changes.
4.3

Connectivity

4.3.1

Cloud Services

Bosch Remote Portal
Operation
The operation mode determines how the camera communicates with the Bosch Remote
Portal.
–
–
Connectivity state
This field identifies any cloud-based services with which the camera communicates.
–
–
Partner services
Registration code
This area displays the state of the Stratocast registration code.
Connectivity state
This field indicates the device's connectivity state with Bosch Remote Portal.
–
Note: The Visit Remote Portal button will become active.
–
Note: The Register button will become active only if you have not registered the device to the
Bosch Remote Portal.
4.3.2

Accounts

Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
2021-08 | V01 | DOC
Select On to poll the server constantly.
Select Off to block polling.
If you have registered the device on a cloud-based service such as Bosch Remote Portal,
then this field identifies this fact ("Connected").
Note: The button () to connect to the device with that service is active.
If you have not registered the device, then the message, "Not available. When
'Operation' is set to 'Auto', 'Automatic IP assignment (DHCP)' must be active to
connect to the Bosch Remote Portal" appears.
Note: The button () to connect to the device with that service is not active.
If the device is registered and the operation mode is set to On, the state will indicate that
the device is Connected (to the cloud service).
If the device is not registered or the operation mode is set to Off, the state will indicate
that the device is Not available.
DINION inteox 7100i IR | FLEXIDOME inteox 7100i
User manual
Bosch Security Systems B.V.