Alert Notification; Silence All - Sanyo Katana Eclipse User Manual

Adjusting the Alert Volume
You can set the alert volume separately from the ringer
volume setting.
1.
Press
Menu > Settings > Sounds > Volume >
Advanced...
2. Select ,
Alarms Text Message
VoiceSMS , or Email
3.
Using the navigation key, select
4.
Press the navigation key left or right to choose a
volume level, and press
Tip You can make the ringer vibrate at any volume level
by checking Always Vibrate .
38 Section 2B. Settings
, ,
Picture Mail Voicemail
.
Separate Vol
(left softkey).
Done

Alert Notification

Set your phone to alert you with an audible tone when
you change service areas, once a minute during a voice
call, or when a call has been connected.
1. Press
Menu > Settings > Sounds > Alerts
2.
Select
Beep Each Minute
,
Signal Fade/Call Drop
If you select
.
Picture Mail
or
RingerLength
3. Select
On

Silence All

The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
With the phone open, press and hold the volume key
down in standby mode. (The screen will display
"Silence All.")
To deactivate Silence All:
Press the volume key up repeatedly to select a
volume level.
,
Out of Service
, or
Messages
, select
Messages Text Message
, ,
Voicemail VoiceSMS
.
, , or an available option and press
Off
.
, ,
Connect
and press .
,
or
Email > Repeat
.