Alert Notification; Silence All; Display Settings; Changing The Text Greeting - Sanyo SCP-3200 Operating Manual

Alert Notification

Your phone comes with several different options to keep you aware of what's going on by
sounding the alert or ringer.
Service sets alert On or Off for network services parameter changes.
Ready Link sets an alert to notify you of Ready Link calls.
Voicemail sets alert to notify you of caller's messages.
Messaging sets alert to notify you of text messages.
Minute Beep sets a minute reminder that beeps ten seconds before the end of each minute
during a call.
Signal Fade sets alert to notify you when your phone loses a signal during a call.
To set the alerts:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Alerts and press MENU/OK.
5. Select your desired option and press MENU/OK.
Tip: Repeat Alert sounds every two minutes for twenty minutes.

Silence All

There may be times when you need to silence your phone entirely. The phone's Silence All
option allows you to mute all sounds without turning your phone off:
To activate Silence All:
> With the phone open, press and hold the volume key down in standby mode. (The screen will
display "Silence All.")
To deactivate Silence All:
> Press the volume key up repeatedly to select a desired volume level

Display Settings

Changing the Text Greeting

The text greeting can be up to 15 characters and is displayed on your phone's screen in standby
mode. You may choose to display a custom greeting or default greeting.
To display or change your custom greeting:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Display and press MENU/OK.
4. Select Greeting and press MENU/OK.
5. Select Custom and press MENU/OK.
You can customize the greeting by entering a personalized greeting.
6. Press MENU/OK.
22