Using Voice Prompt; Setting Up Key Press Echo; Alert Notification - Sanyo SCP-6650 User Manual

Hide thumbs Also See for SCP-6650:
Table of Contents

Advertisement

Selecting a Tone Type
This setting allows you to to select the type of key beep tone.
1. Select
> Settings > Sounds > Others > Tone Type.
2. Select a tone type and press
Setting a Start-up/Power-off Tone
1. Select
> Settings > Sounds > Others.
2. Select Start-up Tone or Power-off Tone.
3. Select a tone, and press

Using Voice Prompt

This feature allows you to hear voice prompts Voice-activated
dialing, when using Voice Memo, Screen Call setting, etc.
(Default Setting is Off.)
1. Select
> Settings > Sounds > Others > Voice Prompt.
2. Select On.
Tip:
When ringer volume is set to
prompts cannot be heard.

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when
you press the keypad. This feature is available when you are in
standby mode.
1. Select
> Settings > Sounds > Others > Key Press Echo.
2. Select On or Off.
Note:
If the Key Beep is off, you are not able to change this setting. See
"Adjusting the Application, Start-up/Power-off, or Key Beep Volume" on
page 32.

Alert Notification

Your phone comes with several different options to keep you
aware of what's going on by sounding the alert or ringer.
To set the alerts:
1. Select
> Settings > Sounds > Alerts.
.
.
Silence All or Vibrate All
4. Your Phone's Settings
, voice
33

Advertisement

Table of Contents
loading

Table of Contents