Voicemail Notification; New Voicemail Message Alerts - Sanyo Katana Eclipse User Manual

Note Voicemail Passcode
If you are concerned about unauthorized access to
your voicemail account, Sprint recommends that
you enable your voicemail passcode (do not
activate One-Touch Message Access).

Voicemail Notification

There are several ways your phone alerts you to a new
message:
By displaying a message on the screen.
By sounding the assigned ringer type.
By the LED blinking.
By displaying at the top of your screen.

New Voicemail Message Alerts

When you receive a new voice message, your phone
alerts you and prompts you to call your voicemail.
To call your voicemail:
Press and hold .
To display your Missed Log:
Press
Menu > Messages > Voicemail > Details
Note When you are roaming off the Sprint National
Network, you may not receive notification of new
voicemail messages. It is recommended that you
periodically check your voicemail by dialing 1 +
area code + your wireless phone number. When
your voicemail answers, press (
passcode. You will be charged roaming rates when
accessing voicemail while roaming off the Sprint
National Network.
Your phone accepts messages even when it is
turned off. However, you are notified of new
messages only when your phone is turned on and
you are in a Sprint service area.
RetrievingYour Voicemail Messages
You can review your messages directly from your
wireless phone or from any other touch-tone phone.
To dial from your wireless phone, either speed dial your
voicemail or use the menu keys.
Using One-Touch Message Access
Press and hold
(Your phone will dial your voicemail box.)
.
Section 3A. Sprint Service: The Basics
) and enter your
*
.
131