Siemens SITRANS LG270 Operating Instructions Manual page 39

Menu - Setup
Menu item
Lock adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Min. adjustment - Level
Max. adjustment - Interface
Min. adjustment - Interface
Damping - Level
Damping - Interface
PBD-51041507
Note:
After this menu window, the reset process is carried out. No further
safety inquiry follows.
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of ship-
ment from the factory, incl. order-specific settings. Any stored false
signal suppression or user-programmed linearisation curve, as well
as the measured value memory, are deleted.
Basic settings: Restores the parameter settings, incl. special param-
eters, to the default values of the respective instrument. Any stored
false signal suppression or user-programmed linearisation curve, as
well as the measured value memory, are deleted.
The following table shows the default values of the instrument. De-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
SITRANS LG270 - Operating Instructions
Default value
Released
Sensor
Distance unit: order-specific
Temperature unit: order-specific
Länge der Messsonde factory setting
Liquid
Level, vessel
Water-based, > 10
Yes
1.5
200 mm
100 %
Distance: 0.000 m(d) - Note dead zones
0 %
Distance: Probe length - Note dead zones
100 %
Distance: 0.000 m(d) - Note dead zones
0 %
Distance: Probe length - Note dead zones
0.0 s
0.0 s
39