Siemens SITRANS LG270 Operating Instructions Manual page 34

Lock/Unlock adjustment
Current output 2
Display
Menu language
34
In the menu item "Lock/unlock adjustment", you can protect the sen-
sor parameters against unauthorized or inadvertent modification. The
PIN is activated/deactivated permanently.
With active PIN, only the following adjustment functions are possible
without entering a PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment module
Caution:
When the PIN is active, adjustment via PACTware/DTM as well as
other systems is also blocked.
In delivery status, the PIN is 0000.
Call our service department if you have modified and forgotten the
PIN.
If a supplementary electronics with an additional current output is in-
stalled in the instrument, you can adjust the additional current output
separately.
In menu item"Current output 2" you specify which measured value the
additional current output refers to.
The procedure corresponds to the previous settings of the standard
current output. See "Setup - Current output".
6.4.2 Display
In the main menu point "Display", the individual submenu points
should be selected one after the other and provided with the correct
parameters to ensure the optimum adjustment of the display options.
The procedure is described in the following.
The following submenu points are available:
The submenu points are described below.
This menu item enables the setting of the requested national lan-
guage.
In delivery status, the sensor is set to English.
SITRANS LG270 - Operating Instructions PBD-51041507