Toro 74657 Operator's Manual page 23

Driving Backward
Note:
Always use caution when backing up and
turning.
1. Move the levers to the center, unlocked position.
2. To go backward, look behind you and down,
as you slowly pull the motion-control levers
rearward (Figure
Figure 15
To go straight, apply equal pressure to both
motion-control levers
To turn, release the pressure on the
motion-control lever toward the direction you
want to turn.
To stop, push the motion-control levers to the
N position.
EUTRAL
Using the Smart Speed
System
The Smart Speed TM Control-System lever, located
below the operating position
operator a choice to drive the machine at 3 ground
speed ranges—trim, tow, and mow.
15).
(Figure 15).
TM Control
(Figure 16), gives the
1. Smart-speed lever
g008953
23
Figure 16
g027625