Toro 74657 Operator's Manual page 2

Hide thumbs Also See for 74657:
Table of Contents

Advertisement

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory tested by
the engine manufacturer in accordance with SAE
J1995 and rated to J2723. As configured to meet
safety, emission, and operating requirements, the
actual engine horsepower on this class of lawn mower
will be significantly lower.
Go to www.Toro.com to view specifications on your
mower model.
This spark ignition system complies with Canadian
ICES-002
Introduction
This machine is a ride-on, rotary-blade intended to be
used by homeowners in residential applications. It is
primarily designed for cutting grass on well-maintained
lawns. It is not designed for cutting brush, mowing
grass and other growth alongside highways, or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial-number plate
Write the product model and serial numbers in the
space below:
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Under the seat
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
Figure 1
g014523
g000502

Advertisement

Table of Contents
loading

This manual is also suitable for:

Timecutter zs 5000Timecutter zs 4200t74661

Table of Contents