16. Press the release button on the flush socket to disconnect the quick‑connect fitting and water hose from the engine.
17. Remove the quick‑connect fitting from the water hose.
a
18. Store the quick‑connect fitting on the boat for easy access.
IMPORTANT: Do not store the quick‑connect fitting in the flush socket on the engine. Doing so would allow the seawater
pump to suck air during engine operation causing an overheating problem. Damages due to engine overheating are not
covered by Mercury MerCruiser Warranty.
19. Insert the dust cover in the flush socket on the engine.
18490
20. Install the propeller.
90-8M0128976
MAY 2017
eng
a -
Quick‑connect fitting (water hose end)
a
b -
Flush socket release button
b
18488
a -
Quick‑connect fitting (water hose end)
b
b -
Water hose
18487
Quick-connect fitting: store on the boat, NOT the engine
a
Dust cover installed in the flush socket
a -
Dust cover
b -
Flush socket
b
63788
Section 4 - Maintenance
Page 81