BMW F800GT Rider's Manual page 86

tion arrows on the tires or on the
7
rim.
Roll front wheel into front sus-
84
pension (telescopic fork).
z
Lift front wheel and install
quick-release axle 2 with
appropriate torque.
Quick-release axle in
telescopic fork
37 lb/ft (50 Nm)
Tighten axle clamping screws 1
to appropriate torque.
All manuals and user guides at all-guides.com
Pinch bolt of quick-re-
lease axle
Tightening sequence:
tighten alternatively
14 lb/ft (19 Nm)
Remove front wheel stand.
without center stand
Remove auxiliary stand.
Slide the brake calipers onto
the brake rotors.
Install screws 1 with specified
torque.
Brake caliper on fork leg
22 lb/ft (30 Nm)
OE
Insert wheel speed sensor in
bore and install screw 1.
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Removing rear wheel
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.