BMW F800GT Rider's Manual page 87

BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Mount rear-wheel stands
( 87).
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
center stand.
Shift into first gear.
Remove bolts 1 of rear wheel,
supporting the wheel as you do
so.
Roll rear wheel out toward rear.
All manuals and user guides at all-guides.com
Installing rear wheel
Malfunctions may occur
during control interventions
by ABS if a wheel other than the
standard wheel is installed.
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning of
this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
Tighten bolts 1 diagonally with
specified torque.
Rear wheel on drive
shaft
Tightening sequence:
tighten diagonally
44 lb/ft (60 Nm)
OE
without center stand
Remove auxiliary stand.
7
85
z