Sediment Cup Cleaning - Honda EU3000IS1AG Owner's Manual

SEDIMENT CUP CLEANING

The sediment cup prevents water that may be in the fuel tank from entering the
carburetor. If the engine has not been run for a long time, the sediment cup
should be cleaned.
1. Turn the engine switch to the OFF position.
2. Turn the fuel valve lever to the OFF position.
3. Use a screwdriver to loosen the latch and open the left side maintenance
cover.
4. Remove the air cleaner cover and paper air filter (see page 31).
5. Disconnect the canister charge hose from the fuel tank and hose joint.
6. Disconnect the breather hose and canister purge hose from the air cleaner
base.
7. Remove the 6 mm bolt and two 6 mm nuts, and remove the air cleaner base.
HOSE JOINT
CANISTER PURGE
HOSE
6 mm BOLT
SERVICING YOUR GENERATOR
BREATHER HOSE
AIR CLEANER BASE
FUEL TANK
CANISTER CHARGE HOSE
6 mm NUTS
59