Battery Installation
1. Install the battery in the generator.
2. Connect the battery positive (+) cable to the battery positive (+) terminal first
and tighten the bolt securely.
3. Slide the battery boot over the positive (+) cable and terminal.
4. Connect the battery negative (–) cable to the battery negative (–) terminal,
and tighten the bolt securely.
5. Install the battery rubber and the battery holder band.
BATTERY BOOT
POSITIVE (+)
CABLE
6. Install the front cover, and install the four 6 mm cap nuts, making sure the
four collared washers are placed in the rubber grommets inside the cover.
SERVICING YOUR GENERATOR
BATTERY HOLDER BAND
NEGATIVE (–)
CABLE
BATTERY RUBBER
65