SERVICING YOUR GENERATOR
FUSE
If the fuse is blown, the starter motor will not work.
In the event of fuse failure, locate the cause of failure and repair it before you
continue operation. If the fuse continues to fail, discontinue generator use and
consult your authorized Honda dealer.
1. Turn the engine switch to the OFF position and remove the key before
checking or replacing the fuse.
2. Remove the four 6 mm cap nuts and the front cover.
COLLAR (4)
FRONT COVER
6 mm CAP NUTS
3. Remove the fuse holder cover and replace the fuse.
Specified fuse: 5 A
Never use a fuse with a different rating from that specified. Serious damage to the
electrical system or fire may result.
4. Install the fuse holder cover.
66