Performing And Deleting The Measurements - PASI Polares 32 User Manual

F 18: T
IGURE ESTING THE ELECTRODES
To perform the test, simply select the electrodes to test in the Test column and then press
the "Test Electrodes" button. The system will proceed with testing one electrode at a time,
displaying the result in the "Test Result" column.

Performing and deleting the measurements

The execution of measurements for a session must be controlled from the Measurements
window for the session of interest. Compared to the similar Measurements window in a
template, a number of commands are provided at the top to allow management of the
measurements. In addition, the table contains several columns: a column to select the
measurements to be performed and other columns to display the measured values.
36