Self Diagnosis Display - Samsung VP-M50 Owner's Instruction Book

Troubleshooting Check
Troubleshooting Check
Before contacting a service centre, perform the following simple checks. They might save you the time
and expense of unnecessary calls.

Self Diagnosis Display

Display Blinking
slow
fast
TAPE END slow
TAPE END no
TAPE slow
TAPE slow
D.EMG slow
C.EMG
R.EMG
L.EMG
DEW slow
Inform that...
the battery pack is almost
discharged
the battery pack is fully
discharged.
the tape has almost reached
its end.
the tape reached its end
there is no tape in the camcorder.
the tape is protected
from recording.
the camcorder has some
mechanical fault.
moisture condensation
has formed in the camcorder.
ENGLISH
Action
Change it to a charged
one.
Change it to a charged
battery.
Prepare a new one.
Change to a new one.
Insert a tape.
If you want to record,
release the protection.
1. Eject the tape.
2. Set to OFF
3. Detach the battery.
4. Reattach the battery.
* Please contact your local service
center if the problem continues.
see page 58.
55