Samsung VP-M50 Owner's Instruction Book page 37

Advanced Shooting
Selecting an effect
1. Set power switch to CAMERA mode and LOCK/STANDBY switch to STANDBY mode.
2. Press MENU ON/OFF button, the MENU list will appear.
3. Turn MENU dial to DSE SELECT.
4. Press ENTER.
- Now the DSE setting is possible.
5. Turn MENU dial to the desired DSE effect.
6. Press ENTER.
The selected DSE effect will now be visible in the Viewfinder.
After selecting MAKE-UP, STROBE or LSS press ENTER,
- in MAKE-UP mode, MENU list for selecting RED/YELLOW
/GREEN/BLUE will appear.
- in STROBE mode, MENU list for selecting 25 field(1)/12
field(2)/ 6 field(3) will appear.
- in LSS mode, MENU list for selecting 1/25(1), 1/12(2), 1/6(3) will appear.
Select the shutter speed and then press ENTER.
To change the content of the selection, place the cursor on the corresponding position by turning
MENU dial and press ENTER again.
7. To end the setting, press MENU ON/OFF button.
Recording DSE in CAMERA mode
1. Set power switch to CAMERA mode and LOCK/STANDBY switch to
STANDBY mode.
2. Press START/STOP button.
Recording should start.
3. Press DSE button during recording to record an effect you have selected.
Any effect you have selected should appear.
4. To return to normal, press DSE button again.
ENGLISH
DIS ......................OFF
D.ZOOM ..............OFF
DEMO ..................OFF
PROGRAM AE
DSE SELECT
WHITE BALANCE
MAKE-UP ........RED
EMBOSS YELLOW
WIDE(16:9) GREEN
CINEMA BLUE
NEG.
MIRROR
MAKE-UP
EMBOSS
WIDE(16:9)
CINEMA
NEG.
MIRROR
37