Audio Dubbing; Dubbing Sound - Samsung VP-D20 Owner's Instruction Manual

Advanced Recording

Audio dubbing

The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
Use the internal and external microphones or other audio equipment.
The original sound will not be erased.

Dubbing sound

1. Set the camcorder to PLAYER mode.
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
When you wish to dub using the External A/V input, connect the
AUDIO/VIDEO cable to the camcorder by inserting the cable jack into the
A/V in/out terminal at the left side of the camcorder. (VP-D20i/D21i only)
- Press the MENU button, turn the MENU DIAL to highlight A/V and press the
ENTER button.
- Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to
select AV IN.
2. Press the (PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
A.DUB will be displayed on the LCD.
The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
Press the (STOP) button to stop the dubbing.
Reference (VP-D20i/D21i only)
You can not use the audio dubbing function while playing a write protected video tape.
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record.
ENGLISH
Audio (L) Audio (R)
AV IN
(VP-D20i/D21i only)
63 63