Entering numbers
You can enter the number of the remote fax machine manually by using the
number keypad. The number you pressed appears in the display.
T E L ) 9 5 5 5 1 2 1 2 _
When the display asks you to enter a number, you can also use a one-touch
dial button (including group dial) and speed dial number.
Editing numbers or names
If you make a mistake while entering a number or name, move the cursor
under the wrong digit by using ˆ ˆ or ¤ ¤ . Then press the correct number to
change, or press Search/Delete to delete the number.
Inserting pause
With some private telephone systems, you must dial an access code (9, for
example) and listen for a second dial tone before dialing an outside
number. In such cases, you must insert a pause in the number. Insert a
pause in a number when you are setting up a one-touch or speed dial
number, or when you dial a number without lifting the handset.
To insert a pause, press Redial/Pause while entering the number.
When you dial a number, the dialing process pauses for about 3~4 seconds
at the point where you pressed Redial/Pause.
If you require a longer pause time, press Redial/Pause twice.
2.6