Table of Contents
Advertisement
Wi-Fi
Connectivity
This Breville Home connected product can be
controlled both through Wi-Fi and Bluetooth.
While Wi-Fi allows for connectivity and control
remotely, Bluetooth allows for control within
range of the product, even without Wi-Fi.
Your Breville Purifier can offer remote
operation by using a home Wi-Fi connection
and the Breville Home Connect™ app
downloaded to a compatible mobile phone
through the Google Play store or Apple App
store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is
compatible with mobile phones running
Android
5.0 or later and iOS devices 11 or
®
later.
NOTE
To control the purifier using the app, the
purifier must be plugged into an active power
outlet.
CONNECT YOUR PURIFIER TO WI-FI
Choose from the options available to allow for
easy pairing and use.
Bluetooth connection has also been activated
for this appliance, which will aid in the pairing
process, providing a higher success rate when
pairing.
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. Once on standby mode, the
will flash fast on the display panel. The air
purifier is now ready to connect.
3. Log into your Breville Home Connect ™
app account and stay on the "Home" page.
To add the purifier to the list, touch 'Add
Device' or the
symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the purifier
will appear in the main page of the app
and the
symbol on the purifier will
illuminate.
5. If connection is unsuccessful, touch and
hold the
button for 5 seconds until
the
light is flashing slowly. Follow the
prompts in the app to connect in a different
mode.
BLUETOOTH
Bluetooth connectivity is an added feature of
Breville Home connected purifiers and other
Breville Bluetooth connected products.
Flashing
indicates connectivity pairing
with the purifier and the Breville Home
Connect™ app. Pairing is quick with no extra
prompts. Refer to the QuickStart Guide in the
box or on Breville.com for specific details on
how to connect through Bluetooth.
symbol
11
Advertisement
Table of Contents
