Table of Contents
Advertisement
Features
YOUR BREVILLE AIR PURIFIER
Your Breville Purifier improves your indoor
air quality using 3 distinct levels of protection
built into the Breville AntiViral Filter including:
1. Pre-filter
For dust & pet dander.
2. AntiViral HEPA-13 filter
For fine airborne particles, allergens and
virus reduction including SARS-CoV-2 viral
particles and H1N1 & H3N2 particles.
3. Activated carbon filter
For odours and smoke.
• Reduces 99.97% SARS-CoV-2 and 99.99%
Influenza A viral particles^
• Removes 99.97% of smoke, pollen & dust
particles down to 0.3 m
• ^The AntiViral filter material is tested for the
reduction of SARS-CoV-2, H1N1 and H3N2
viral particles as per ISO 18184.
8
Assembly
BEFORE FIRST USE
• Remove and safely discard any packaging
material or promotional labels attached to
your air purifier and filter.
• Remove the filter from the air purifier
(see REPLACING THE FILTER on page 12)
and take it out of the plastic bag. Then
re-insert the filter into the air purifier.
• Select a flat and level location for the
air purifier.
• For proper air flow, locate the unit at least
20cm from any wall or furniture.
• Ensure the air inlet and outlets are not
blocked before use.
• Ensure the filter has been fitted correctly as
per the instructions in this book.
• Plug the adaptor into a 230V–240V power
outlet and connect to the adaptor inlet of the
air purifier. Turn on the power outlet.
IMPORTANT
When moving the air purifier, always lift the
unit using two hands and set down gently on
a flat and level surface.
IMPORTANT
Do not use any other adapter other than the
one provided with the unit.
Advertisement
Table of Contents
