Wi-Fi Connectivity - Breville Easy Air LAP158 Instruction Book

Connect purifier
Table of Contents

Advertisement

TIMER
• The air purifier can be set to operate for
timed intervals of 2 hours, 4 hours and 8
hours, stopping automatically when the
selected operating time has elapsed.
• If no timer is set, the air purifier will
continuously operate until the unit is
manually switched off.
• Press the
TIMER button repeatedly until
the desired interval hours are illuminated on
the control panel.
• For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.
FILTER RESET
• The filter reset light will illuminate red
indicating that the filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold the
POWER button for 5 seconds to reset the
Filter Reset light.
• The built-in timer for the filter reset is 4,320
operating hours.
• If the Wi-Fi is connected, while the reset filter
light is reset, the Wi-Fi will need to be
re-activated. Press and hold the
button until the light illuminates on the
Wi-Fi icon.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.
10
The Breville Easy Air
offer remote operation by using a home Wi-Fi
connection and the Breville Home Connect™
app downloaded to a compatible mobile phone
through the Google Play store or Apple App
store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
POWER
The Breville Home Connect™ app is
compatible with mobile phones running
Android
or later.
To control the purifier using the app, the
purifier must be plugged into an active power
outlet and switched on at the power outlet.
If the purifier is turned OFF or disconnected
from the power outlet, then the app cannot
connect to the purifier via the network.
Wi-Fi
Connectivity
Connect Purifier can
TM
NOTE
5.0 or later and iOS devices 9.0
®
NOTE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

The easy air connect purifierLap158Lap158wht2ian1

Table of Contents