Table of Contents
Advertisement
FAN SPEED/TURBO MODE
NOTE
The air purifier will resume in the last
programmed setting once it has been turned
off, even if turned off at the power outlet. If the
last programmed setting was Night mode, once
turned on, the control panel will illuminate
with the Night indicator light blinking as a
reminder that Night mode has been set.
• Press the
FAN SPEED button repeatedly
until the desired speed is illuminated on the
control panel.
• There are 4 fan speeds: Low, Medium, High
and Turbo.
• The purifier has reached Turbo mode when
all three lights are illuminated on the control
panel at the same time.
NOTE
When changing the fan speed, the unit may
take a few seconds to adjust.
TIMER
• The air purifier can be set to operate for
timed intervals of 2 hours, 4 hours and 8
hours, stopping automatically when the
selected operating time has elapsed. If no
timer is set, the air purifier will continuously
operate until it is manually switched off.
• Press the
TIMER button repeatedly until
the desired interval hours are illuminated on
the control panel.
• For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.
10
AUTO MODE
• When in Auto mode, the air purifier will
automatically adjust the speed to help filter
the air based on the sensor reading.
• To set to Auto, press the
POWER button
continuously until the Auto indicator light
illuminates.
• Press the
POWER button or the Fan
Speed button, to turn Auto off and beneath
Auto indicator light will extinguish.
IMPORTANT
Turning the unit On and Off will require
cycling through the Auto mode.
FILTER RESET
• The Filter reset light will blink continuously
indicating that the filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold
the
Microbe Shield
/Night Mode/Filter
TM
Reset button for 5 seconds to reset the Filter
Reset light.
• The built-in timer for the filter reset is 4,320
operating hours.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the Instructions
found in the Care, Cleaning & Storage section
of this book.
Wi-Fi
Connectivity
The Breville Smart Air
Connect Purifier can
TM
offer remote operation by using a home Wi-Fi
connection and the Breville Home Connect™
app downloaded to a compatible mobile
phone. through the Google Play store or Apple
App store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is
compatible with mobile phones running
Android
5.0 or later and iOS devices 9.0
®
or later.
NOTE
To control the purifier using the app, the
purifier must be plugged into an active power
outlet.
CONNECT YOU PURIFIER TO WI-FI
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The purifier must be turned on via the
control panel. Once on, the
symbol will
flash fast on the display panel. The purifier
is now ready to connect.
3. Log into your Breville Home Connect ™
app account and stay on the "Home" page.
To add the purifier to the list, touch 'Add
Device' or the
symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the purifier
will appear in the main page of the app
and the
symbol on the purifier will
illuminate.
5. If connection is unsuccessful, touch and
hold the
and
buttons together for
5 seconds until the
symbol is flashing
slowly. Follow the prompts in the app to
connect in a different mode.
11
Advertisement
Table of Contents
