Setup Of Speed Limit; Use The Alarm At Waypoint Navigation; Sound Alarm At Arrival At Waypoints - JRC JFC-180BB Instruction Manual

Echo sounder
Hide thumbs Also See for JFC-180BB:
Table of Contents

Advertisement

JFC-180BB
At [ON-Slower], alarm is delivered when
the speed falls less than the specified
speed.
5. To set the [Speed Limit] related items
subsequently: go to item 2 of 2.4.2.
6. Press
to close the menu.
Caution: Press any key to stop any
alarm sound and alarm display.
Caution: To activate the alarm
sound and the alarm display
again after once stopped, it is
necessary for the boat to go
outside of the alarm conditions.
Caution: When CCD camera
image is displayed, the alarm
display will be only by icon
display. (See "2.7 Confirmation
of alarm conditions", p 2-9.)

2.4.2 Setup of Speed Limit

Alarm2 - Speed Limit
This is to set the speed to deliver alarm.
1. Press
.
2. Select [Alarm2] - [Speed Limit].
3. Press [ ] of
The setup box of [Speed Limit] will be
displayed.
4. Pressing [▲] and [▼] keys, set Speed
Limit.
5. Press
to close the menu.
7ZPNA4619A
.

2.5 Use the alarm at waypoint navigation

Alarm can be used while waypoints are set.
(See the Instruction Manual [Basic], "4.4 To
use event key" or the Instruction Manual
[Advanced], "3.1 Starting waypoint NAV") .
The contents for the alarm function
during waypoint navigation are as
follows:
Sound alarm when arrived the
waypoint
Sound alarm when course
deviation is found to a waypoint.
Set the alarm range for arrival
alarm and cross track error

2.5.1 Sound alarm at arrival at waypoints

Alarm2 - Arrival Alarm
This is used after waypoints have been set.
When arrived at the specified range of the
waypoints, alarm will be delivered. The
range shall be set at [NAV Alarm Range].
1. Press
.
2. Select [Alarm2] - [Arrival Alarm]
3. Press [ ] of
The setup box of [Arrival Alarm] will be
displayed.
4. Press [▲] and [▼] keys, select [ON] to
activate the alarm and [OFF] to stop it.
5. To set the items related to waypoint
navigation subsequently:
(1) Go to item 2 of 2.5.2, when [XTE
Alarm] is set.
(2) Go to item 2 of 2.5.3, when [NAV
Alarm Range] is set.
6. Press
to close the menu.
Chapter 2 Alarm
.
2-7
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録

Advertisement

Table of Contents
loading

Table of Contents