Table of Contents
Advertisement
Chapter 2 Alarm
2.1.3 Setup of Lower Depth
Alarm1 - Lower Depth
To set the depth, where to activate alarm
when the depth becomes deeper than a
specified depth, will be set.
1. Press
.
2. Select [Alarm1] - [Lower Depth].
3. Press [ ] of
The setup box of [Lower Depth] will be
displayed.
4. Pressing [▲] and [▼] keys, set Lower
Depth.
5. Press
to close the menu.
Caution: The minimum value of
Upper Depth is the Upper Depth + 1
m.
2.2 Use of Fish Alarm
When there is response recognized as fish
school within a set area, notice will be
provided with sound and display.
It is convenient to judge if there is response
of fish school.
The contents to use this Fish Alarm
are as follows:
•
Start/Stop the Fish Alarm
•
Set the Fish From
Set the Fish Span
•
•
Set the Upper Level
・
•
Set the Lower Level
•
Set the Alarm Signal Length
•
Set the Fish Image
2-2
.
2.2.1 Start/Stop Fish Alarm
Alarm1 - Fish Alarm
Select [ON] to enable the fish alarm and
[OFF] to deactivate.
1. Press
.
2. Select [Alarm1] - [Fish Alarm]
3. Press [ ] of
The setup box of [Fish Alarm] will be
displayed.
4. Press [▲] and [▼] keys, select [ON] to
enable the alarm and [OFF] to delete it.
5. Consecutively, to set the Fish Alarm
related items subsequently:
(1) Go to item 2 of 2.2.2, when [Fish
From] is set.
(2) Go to item 2 of 2.2.3, when [Fish
Span] is set.
(3) Go to item 2 of 2.2.4, when [Upper
Level] is set.
(4) Go to item 2 of 2.2.5, when [Lower
Level] is set.
(5) Go to item 2 of 2.2.6, when [Alarm
Signal Length] is set.
(6) Go to item 2 of 2.2.7, when [Fish
Image] is set.
6. Press
to close the menu.
Caution: Press any key to stop any
alarm sound and alarm display.
Caution: To activate the alarm
sound and the alarm display
again after once stopped, it is
necessary for the boat to go
outside of the alarm conditions.
JFC-180BB
.
7ZPNA4619A
Advertisement
Table of Contents
