Table of Contents
Advertisement
JFC-180BB
Chapter 7 Data of SD Card and
USB Memory
Caution: Please use the SD card
and the USB memory (with
FAT16 or FAT32 format) JRC
recommends. When another
type of device is used, JRC
doesn't assure operation.
The data in the SD card or the USB memory
is saved as the following file name in the
corresponding folder:
Data
Folder
Image
PICTURE
Waypoint WAYPOINT
Settings
FXBACKUP
An image file carries a pair of bit map file
(zip.) and information file (inf.).
7.1 Storage
If the same file name exists, it is overwritten
(after warning message is given). Please
move the data to another folder in the
personal computer beforehand to avoid the
overwriting.
Storing/recalling files to/from the SD card or
the USB memory can be only possible under
the folder and file names described above.
If you desire to keep many kinds of files,
please make sure to keep them in the
specified folder on PC. JRC recommends
the data to be managed by folders, making
no changes in file names.
7ZPNA4619A
Chapter 7 Data of SD Card and USB Memory
7.2 Recall
If you retrieve a file from the many saved,
please rename the folder and the file name
on PC as designated, before the recalling
process.
7.3 SD Card recommendation
JRC recommends the following type and
manufacturer of the SD card to be used.
<Standard>
SD
PHYSICAL LAYER SPECIFICATION Ver 2.0
<Speed Class>
Class 6
<Command Class>
File name
Class 10 above
PIC00001.zip
PIC00001.inf
Recommended SD/SDHC Card
|
PIC00500.zip
PIC00500.inf
WPT00001.wfx
7.4 USB Memory recommendation
|
JRC recommends the following type and
WPT00010.wfx
manufacturer of the USB Memory to be
used.
FXBACKUP.fx2
<Interface>
Hi-Speed USB2.0
<Capacity>
４GB or more
Recommended USB Memory
ELECOM
Transcend
Memory
Card
Specification
Manufacturer
ADTEC
AD-SDHM4G/6
Transcend
TS2GSD2
Manufacturer
MF-SU204G
TS4GJF300E
1
2
3
4
5
6
7
Part1
9
10
11
12
13
Standard
14
15
16
17
18
19
20
21
Standard
22
23
24
25
26
27
付録
7-1
Advertisement
Table of Contents
