Table of Contents
Advertisement
6.
Open both latches of the memory module socket (1), and insert the memory module into the socket (2).
Push the module down into the socket, ensuring that the module is fully inserted and properly seated.
Make sure the latches are in the closed position (3).
NOTE:
on the memory socket.
For maximum performance, populate the sockets so that the memory capacity is spread as equally as
possible between Channel A and Channel B. See
7.
Repeat step 6 to install any additional modules.
8.
Replace the computer access panel.
9.
Reconnect the power cord and any external devices, and then turn on the computer. The computer
should automatically recognize the additional memory.
10.
Lock any security devices that were disengaged when the access panel was removed.
14
Chapter 2 Hardware upgrades
A memory module can be installed in only one way. Match the notch on the module with the tab
Populating DIMM sockets on page 12
Advertisement
Table of Contents
