Fujitsu Comfort Series Service Manual page 58

7.1.5 INVERTER PCB removal
fan motor connector
scr
hook 2
x
Change the direction of holder (step 1)
fit in the groove
pressure switch connector
e w scr
screw 4
x
Remove the mounting screws
Remove the binder ( don't cut )
Remove the fan motor connector and the pressure switch connector
⇩
Change the direction of holder (step 3)
e w
screw 8
x
binder
Change the direction of holder (step 2)
hook on the ◁ marked hook
04-03