Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Figure 30. Replacing the LED assembly
7. To replace, see Figure 30 and follow these steps:
a. Plug the signal cable to LCD.
b. Place the assembly face up on a steady surface.
c. Align the LCD with the LCD shield and thread the backlight cables through
the holes.
d. Replace the four screws holding the LCD.
e. Turn the LCD assembly over. Replace the bezel and install the eight screws.
f. Connect the backlight cables into the backlight inverter card.
Chapter 4. Removing and replacing FRUs
43
Advertisement
Table of Contents
