Olivetti PG L2235 Operation Manual page 64

Maintenance
Replacing the Toner Container
This section explains how to replace the toner container.
CAUTION Do not attempt to incinerate parts which contain
toner. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT O livetti Document Solutions Inc. is not liable against
any damages or problems arising from the use of toner containers
other than those designated as original O livetti toner containers. For
optimum performance, it is also recommended to use only the O livetti
toner containers which are specifically intended for use in your
country or region. If the toner container for another destinations is
installed, the printer will stop printing.
You do not have to turn printer power off before starting
Note
the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off .
1
Open the top cover.
2
Turn the lock lever to the unlock position. Push the lock lever to the
position marked by the arrow and pull out the toner container.
Note Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.
4-3